A damaged dry van can interrupt deliveries, expose cargo to weather and create larger mechanical or structural problems. Technomech Trailer Repair provides commercial dry van trailer repair in Houston for owner-operators, drivers, fleet managers and logistics businesses.

We repair qualifying 53-foot dry van floors, roofs, doors, side panels, rear frames, brakes, axles, suspension and structural components at our Houston trailer shop.

Call before visiting to describe the damage and check current availability.

Call Now: (713) 420-9622
Get Directions to Our Houston Shop

Calls Answered 24/7 • English & Spanish • Mobile Availability Within Approximately 25 Miles

Complete Commercial Dry Van Repair

Dry van trailers experience constant road vibration, loading impacts, forklift traffic, weather exposure and repeated door operation. These conditions can damage both the trailer body and its mechanical components.

Our dry van repair services include:

  • Trailer floor repair

  • Roof repair and panel patching

  • Sidewall and interior-panel repair

  • Swing-door repair

  • Roll-up-door repair

  • Rear-frame repair

  • Door-seal and gasket replacement

  • Crossmember repair

  • Aluminum and steel welding

  • Structural fabrication

  • Brake and wheel-seal repair

  • Axle repair and replacement

  • Suspension repair

  • Landing-gear repair

  • Lighting and electrical repair

  • ABS-related trailer repair

  • Preventive maintenance

  • DOT trailer inspections

The appropriate repair depends on the material, location and extent of the damage. Every trailer should be inspected before work is recommended.

Dry Van Trailer Floor Repair

Dry van floors support cargo, pallets, forklifts and loading equipment. Over time, moisture, impacts and concentrated loads can damage the visible flooring or supporting structure underneath it.

Signs your dry van floor may require repair include:

  • Cracked or broken boards

  • Soft floor sections

  • Uneven surfaces

  • Sagging areas

  • Loose floor material

  • Gaps between sections

  • Water damage

  • Visible crossmember damage

  • Movement during loading

  • Deterioration near the rear entrance

A damaged floor can interfere with loading and allow the problem to spread into nearby supports. Our team evaluates the visible flooring and accessible crossmembers before recommending repair or replacement.

Learn more about trailer floor repair.

Dry Van Roof Repair

Dry van roofs can be damaged by low-clearance contact, tree branches, loading equipment, weather, corrosion and road debris.

Possible warning signs include:

  • Roof punctures

  • Water entering the cargo area

  • Interior water stains

  • Cracked roof seams

  • Loose roof material

  • Light visible through the roof

  • Damaged corners

  • Previous patches separating

  • Moisture affecting interior panels

The source of a leak may not be directly above the visible interior stain. Water can travel along seams and structural components before entering the cargo area.

Our team inspects the affected roof and surrounding material to determine whether patching, panel work or a larger repair is appropriate.

Explore our trailer roof-panel repair service.

Swing-Door and Roll-Up-Door Repair

Dry van doors must open, close, latch and align correctly. Repeated use and loading impacts can damage the doors, hinges, latches, tracks, frames and surrounding structure.

We repair qualifying:

  • Swing doors

  • Roll-up doors

  • Door frames

  • Rear frames

  • Hinges

  • Latches

  • Locking hardware

  • Rollers and tracks

  • Door seals

  • Mounting points

  • Damaged welded areas

Arrange an inspection if a door binds, does not close evenly, requires excessive force or leaves a visible gap.

A door-seal replacement alone may not correct the problem if the door or rear frame has become misaligned.

Learn more about commercial trailer door repair.

Sidewall and Interior-Panel Repair

Trailer walls and panels protect cargo from weather, road debris and outside contact. Damage may result from forklifts, shifting loads, collisions, docks or repeated commercial use.

Panel damage may include:

  • Exterior punctures

  • Interior wall damage

  • Dents and tears

  • Separating seams

  • Loose panel sections

  • Water-damaged material

  • Damaged corner areas

  • Holes from shifting cargo

  • Corrosion near the lower rail

  • Damage around an earlier repair

Some smaller damaged sections may be patched, while larger areas may require partial panel replacement or structural work.

The surrounding posts, rails and supports should also be checked when panel damage is severe.

Crossmember and Structural Repair

Crossmembers support the trailer floor and help distribute cargo weight. They can become bent, cracked, corroded or separated after years of operation or a significant loading impact.

Structural warning signs include:

  • Floor sections sagging

  • Visible bent supports

  • Broken welds

  • Cracks around mounting points

  • Loose brackets

  • Damage near the rear frame

  • Repeated cracking near an earlier repair

  • Structural components shifting under load

Depending on the condition, repair may involve welding, reinforcement, fabrication or component replacement.

Technomech provides trailer welding and fabrication in Houston for qualifying aluminum and steel components.

Dry Van Brake and Wheel-Seal Repair

Commercial trailer brakes should be inspected when a driver notices reduced braking performance, pulling, unusual noises or visible component damage.

Our qualifying services include:

  • Trailer brake inspection

  • Brake-component repair

  • Wheel-seal service

  • Air-system checks

  • Related brake hardware

  • ABS-related trailer repair

Brake and wheel-end concerns should be inspected before the trailer returns to regular operation.

Learn more about trailer brakes and wheel-seal repair.

Axle and Suspension Repair

Axle and suspension components help support the trailer and cargo while maintaining stability on the road.

Arrange an inspection if you notice:

  • Uneven tire wear

  • A trailer leaning to one side

  • Unusual vibration

  • Damaged air bags

  • Broken or worn suspension components

  • Grease around axle components

  • Unusual noises

  • Visible axle damage

  • Poor trailer tracking

Our Houston shop provides qualifying axle, suspension and related commercial trailer repairs.

Landing-Gear Repair

Landing gear supports the front of a disconnected dry van. Damage can make coupling, uncoupling and loading operations difficult.

Warning signs include:

  • Difficult cranking

  • Bent landing-gear legs

  • Uneven trailer support

  • Damaged mounting brackets

  • Loose welded areas

  • Visible corrosion

  • Gearbox or handle problems

The landing gear, mounting points and surrounding trailer structure should be inspected together.

Trailer Lighting and Electrical Repair

Lighting and wiring problems can affect trailer visibility and operation. Common problems include damaged connectors, corroded wiring, broken lamps and intermittent electrical faults.

Our services may include inspection and repair of qualifying:

  • Tail lights

  • Brake lights

  • Marker lights

  • Turn signals

  • Wiring

  • Connectors

  • Mounting points

  • Related ABS wiring

Call with the symptoms and trailer details so the team can check current availability.

Preventive Maintenance for Dry Vans

Routine maintenance can help identify wear before it becomes a larger repair problem.

A dry van inspection may include:

  • Doors and hardware

  • Floor condition

  • Roof and panels

  • Lighting

  • Brakes

  • Wheel seals

  • Axles

  • Suspension

  • Landing gear

  • Tires

  • Crossmembers

  • Welded areas

  • Earlier repair locations

Fleet managers should document recurring damage and schedule inspections based on trailer use and operating conditions.

Signs Your Dry Van Needs Repair

Contact a commercial trailer repair shop if you notice:

  • Roof or wall leaks

  • Soft or broken flooring

  • Doors not closing correctly

  • Damaged door seals

  • Punctured side panels

  • Bent rear-frame components

  • Cracked welds

  • Sagging floor sections

  • Broken crossmembers

  • Uneven tire wear

  • Brake or wheel-seal concerns

  • Damaged suspension

  • Lighting failures

  • Landing-gear problems

Do not wait for a small body or structural problem to affect additional components.

Mobile Dry Van Repair Availability

Mobile assistance may be available within approximately 25 miles of the Houston shop for qualifying repairs.

Availability depends on:

  • Exact trailer location

  • Type and severity of damage

  • Safe working conditions

  • Required equipment

  • Whether the trailer is loaded

  • Technician availability

  • Whether shop service is more appropriate

Complex floor, roof, panel or structural work may need to be completed at the shop.

Learn more about mobile trailer repair in Houston.

Why Choose Technomech Trailer Repair?

Commercial Trailer Focus

We focus on large commercial trailers, including dry vans, reefers, flatbeds, semi-trailers and chassis.

Body and Mechanical Repairs

Our Houston shop handles trailer floors, roofs, doors, panels, brakes, axles, suspension, landing gear and structural components.

Welding and Fabrication

Qualifying aluminum and steel repair or fabrication is available for frames, crossmembers, brackets and related components.

Shop and Mobile Options

Customers can visit our Houston repair shop. Mobile support may be available for qualifying repairs within the service radius.

English and Spanish Assistance

Our team can handle customer calls in English and Spanish.

Calls Answered 24/7

The shop is not open 24 hours, but calls are answered 24/7. Call to check current repair availability.

Dry Vans We Service

Technomech services qualifying large commercial dry van semi-trailers, including 53-foot trailers.

We do not accept small box trailers, boat trailers, utility trailers or tractor repair jobs. Call if you are unsure whether your equipment qualifies.

Frequently Asked Questions

What dry van trailer repairs do you provide?

We repair qualifying dry van floors, roofs, doors, seals, panels, rear frames, crossmembers, brakes, axles, suspension, landing gear, lighting and structural components.

Can a damaged dry van floor be repaired?

Some damaged flooring and supporting components may be repairable. The solution depends on the material, affected area and condition of the crossmembers below it.

Do you repair dry van swing doors and roll-up doors?

Yes. We repair qualifying swing doors, roll-up doors, hinges, latches, tracks, rollers, seals and rear-frame components.

Can you repair a leaking dry van roof?

Qualifying roof punctures, seams and damaged sections may be repaired after inspection. The surrounding roof and interior areas should also be checked for water damage.

Do you repair 53-foot dry van trailers?

Yes. Technomech services qualifying large commercial dry van semi-trailers, including 53-foot units.

Is mobile dry van repair available?

Mobile support may be available for qualifying repairs within approximately 25 miles. Complex body and structural work may require shop service.

Where is your dry van trailer repair shop?

Technomech Trailer Repair is located at 9346 Fairbanks North Houston Road, Houston, TX 77064.

Schedule Dry Van Trailer Repair in Houston

Keep your commercial trailer ready for its next load. Call Technomech Trailer Repair for qualifying floor, roof, door, panel, brake, axle, suspension or structural repair.

Technomech Trailer Repair
9346 Fairbanks North Houston Road
Houston, TX 77064
Call: (713) 420-9622

Calls Answered 24/7 • English & Spanish